Information about our products

- Our White, Onyx Black, Surgical Blue &  Pink face masks are available in ASTM Level 1-3 medical-grade

- Our Whaley Awesome, Sweet Tooth, Snowflake face masks are available in ASTM Level 3 medical-grade

- Comes with a soft inner layer that accommodates sensitive skin

- Comes with an inner polypropylene layer offering from 95%-98% BFE protection, as recommended by the Government of Canada

- Nose wire for secure fit (available without nose wire if requested)

- Soft ear loops to ensure comfortable long wear

- Fluid resistance from 80-160 mmHg

- Comes in both adult and kids sizes

- Single use

- Dispose after each use

- Replace your mask if you were in a densely populated area (shopping centre) or between clients/customers if you have been in close proximity

- Masks should be replaced if they become wet, soiled, torn or compromised in any way

- Every time you adjust your mask, put it on or take it off, wash your hands or use alcohol-based hand sanitizer

1) Ensure you have washed your hands with soap and water or used hand sanitizer before you get a mask

2) Take your mask out of the box or bag by the ear loops

3) Ensure that the soft side is facing inwards and that the nosepiece is at the top

4) Place both ear loops around your ears and pull the bottom of the mask down under your chin to ensure full facial coverage

5) Once the mask is on your face comfortably, press along the nosepiece to ensure it fits snuggly around your nose

1) Wash your hands or use hand sanitizer before handling the mask

2) Grab the ear loops, avoid touching the mask

3) Discard mask in a garbage bin

4) Wash hands or use hand sanitizer after handling

- Our 3-ply non-medical masks are not ASTM rated and are not recommended for medical use

- Contains an inner-layer of protective Polypropylene material, as recommended by the Government of Canada

- Comes with a soft inner layer that accommodates to sensitive skin

- You can also wear the soft side on the outside if you would like, because the protective inner layer is effective no matter which way you wear your mask

- Nose wire for secure fit

- Soft ear loops to ensure comfortable long wear

- Available in both adult and kids sizes

- Single use

- Dispose of after each use

- Replace your mask if you were in a densely populated area (shopping centre) or between clients/customers if you have been in close proximity

- Masks should be replaced if they become wet, soiled, torn or compromised in any way.

1) Ensure you have washed your hands with soap and water or used hand sanitizer before you get a mask

2) Take your mask out of the box or bag by the ear loops

3) Ensure that the coloured side is facing outwards and that the nosepiece is at the top

4) Place both ear loops around your ears and pull the bottom of the mask down under your chin to ensure full facial coverage

5) Once the mask is on your face comfortably, press along the nosepiece to ensure it fits snuggly around your nose

1) Wash your hands or use hand sanitizer before handling the mask

2) Grab the ear loops, avoid touching the mask

3) Discard mask in a garbage bin

4) Wash hands or use hand sanitizer after handling

- 4-ply masks are not ASTM tested and are not recommended for medical use

- Contains an inner-layer of protective Polypropylene material, as recommended by the Government of Canada

- Comes with a soft inner layer that accommodates to sensitive skin

- Nose wire for secure fit

- Soft ear loops to ensure comfortable long wear

- Available in both adult and kids sizes

- Single use

- Dispose after each use

- Replace your mask if you were in a densely populated area (shopping centre) or between clients/customers if you have been in close proximity

- Masks should be replaced if they become wet, soiled, torn or compromised in any way.

1) Ensure you have washed your hands with soap and water or used hand sanitizer before you get a mask

2) Take your mask out of the box or bag by the ear loops

3) Ensure that the coloured side is facing outwards and that the nosepiece is at the top

4) Place both ear loops around your ears and pull the bottom of the mask down under your chin to ensure full facial coverage

5) Once the mask is on your face comfortably, press along the nosepiece to ensure it fits snuggly around your nose

How to safely dispose of your used mask

1) Wash your hands or use hand sanitizer before handling the mask

2) Grab the ear loops, avoid touching the mask

3) Discard mask in a garbage bin

4) Wash hands or use hand sanitizer after handling

- Offers 180 degrees full face and eye protection

- Clear APET acrylic shield

- Light weight and comfortable

- Comes in three options; Forehead mount with foam comfort pad, Face Masks with Eye Shield and Eye-Glass Mounted Face Shield

- When worn together with a properly fitted surgical mask, face shields offer protection from contamination to others, as well as to the wearer

- Where face masks are not available, face shields may be used as an alternative

- Face shields should always be worn with a mask underneath, since face shields do not offer you full protection from infectious respiratory particles that can escape around the face shield

- The CDC recommends wearing disposable face shields once. You can use a non-disposable face shield repeatedly as long as it’s not warped, damaged or cracked

- If your face shield becomes damaged, don’t try to fix it. Dispose of it and get a new one 

- Our face shields are reasonably priced and easy to replace

1) Ensure you have washed your hands with soap and water or used hand sanitizer before you get a mask

2) Bend forward slightly, holding on to the straps of the face shield with both hands. Do not touch the front of the face shield

3) Expand the elastic with your thumbs and place the elastic behind your head, so that the foam rests on your forehead

4) Once the shield is on, check to make sure it covers the front and sides of your face and no areas are left uncovered. The forehead band should sit about 3cm above your eyebrows, with the bottom of the shield sitting below chin level

5) You must always have the shield down. The shield should never be pushed to the “up” position

6) If your visor does not stay in position, tighten by adjusting the elastic on the side of the face shield. Each type of shield is slightly different

7) Face shields can be kept on for as long as they keep their shape and remain intact; and when appropriate steps are taken to avoid cross contamination

At no time should the front of the face shield be touched

1) Take off other PPE first and wash hands before taking off the shield

2) Tilt your head forward slightly, grab the strap at the temple and pull forward and over your head

3) Dispose of the face shield safely if it isn’t reusable or place the used face shield into a bag or container to be transferred/collected to an area where cleaning or mass disinfection will occur

4) Wash hands again

To Wash the face shield:

1) Submerge the protective panel in warm, soapy water first to get any surface contaminants off and then gently clean the surface with a soft sponge or cloth. After that, rinse and gently dry your face shield with a soft towel (cotton or microfiber). You can clean the headpiece separately. It’s possible to clean a face shield with antibacterial wipes, but be careful because they can leave a residue. You can also sanitize your face shield with 70% isopropyl alcohol wipes. If you’re tempted to use a window or household cleaner on your face shield, don’t. Harsh cleaners could potentially damage it!

Re-using single-use face shields is not recommended and they should be discarded immediately after use. Re-using should only be considered in the context of a critical supply issue.

If available, the manufacturer’s instructions for use (IFU) should be followed